The Woodpecker electrical hammer is a tool designed for the artistic working of marble , stone and wood. The main feature of mechanical hammer is the controllable percussion strength which is automatically triggered according to the pressure exercised on the hammer.This allows the use of the hammer in delicate working, and medium/rough work.
With a system of adaptors the woodpecker hammer can be used with any Pnuematic ended tools, such as Claw chisels, Carving chisel , Gouges & Points, the same that are used with pneumatic air hammers.
( The maximum reccomended size of cutting edge on the chisels is 16 mm )
The Hammer will accept 12.5mm Shank Pnuematic ended chisels, but also comes with an adaptor for 7.5mm Chisels.
The regular percussion and the minimum vibration allows precise and delicate working like other similar Air Hammers do.
The hammer use fed by a single-phase motor.
This Hammers Vibration is a lot lower than most Air Tools, and so can be used for longer. According to current HAV guidelines, as long as you make efforts to reduce your exposure to Vibration ie keep warm, regular breaks etc, you can safely use the Woodpecker for an 8 hour shift.
**HSE Regulations on Hand-Arm-Vibration**
Click here to read the HSE document for Employers
Click here to read the HSE document for Employees
- SINGLE PHASE MOTOR 230 V , 50 HZ ,037 kW
- NUMBER OF IDLE REVOLUTION 2,770 RMP
- WEIGHT 9,5 KG
- OVERALL LENGHT 2505 mm
- CONNECTION TO CHISELS ( tool entry diameter ) Ø 12,5mm/7,5mm
- IDLE SOUND LEVEL ACCORDING TO A-SCALE 57db ( A )
- THE NOISE LEVEL UNDER WORKING IS 85 db ( A )
- HAND/ARM WEIGHTED VIBRATION * MAX. ENERGY 4.5 m/sec/2
- MIN. ENERGY 4.5 m/sec/2
- IDLE 2.9m/sec/2
This tool can take 2 weeks to deliver.
This Tool is fitted with a European Plug, and will need an adaptor for UK use. For US use, you will also require a Voltage Converter. See Below for Details.
US Power Converters are available from Amazon.Com - Click Here